Overview
King Sleep+ Mattresses are designed for long-term comfort and performance. Regular cleaning and maintenance help maintain hygiene and extend the life of the mattress. This guide provides step-by-step instructions for cleaning, refreshing, and maintaining Sleep+ mattresses, including Fit Covers and WarmFit Covers.
Cleaning and Refreshing the Sleep+ Mattress
Vacuuming the Mattress Interior
-
Unzip and remove the top Comfort Layer.
-
Use an upholstery cleaning tool to vacuum inside the mattress, removing dust and debris.
-
If spills or soiling occur, spot clean immediately following the stain treatment steps below.
Washing Sleep+ Fit Covers
General Washing Instructions
-
Unzip and remove the Fit Cover from the mattress.
-
Hand wash in warm water using a neutral wool detergent.
-
Alternatively, machine wash on a gentle cycle at:
-
40°C (104°F) for standard Fit Covers.
-
30°C (86°F) for WarmFit Covers (disconnect the controller switch before washing).
-
-
Drying Instructions:
-
Tumble dry on a cold setting for up to 15 minutes or line dry over a clothesline.
-
Do not use pegs on WarmFit heating wires.
-
Ensure all electrical connections for WarmFit Covers remain moisture-free.
-
-
Do not bleach, dry clean, or iron Fit Covers.
Spot Cleaning Fit Covers
If localised soiling occurs, follow these steps:
-
Sponge the affected area gently using lukewarm water and a neutral wool detergent or mild soap flakes.
-
Rinse the area twice with clean lukewarm water.
-
Squeeze the treated area between two towels to remove excess moisture.
-
Lay the cover flat to dry in a shaded area (do not hang).
For WarmFit Covers, always disconnect the controller switch before cleaning.
Pilling
-
Pilling may naturally occur but does not affect the comfort or functionality of the fabric.
By following these cleaning and care guidelines, customers can keep their Sleep+ Mattress fresh and well-maintained for years to come.